INPUT SPECIFICATION |
Voltage Range |
100-120VAC |
200-240VAC |
Frequency Range |
47-63Hz |
Efficiency |
LRS-60-12: 86% |
LRS-60-24: 88% |
AC Current(typ.) |
0.95A / 115VAC; 0.56A / 230VAC |
Inrush Current(typ.) |
45A / 230VAC (for cold start at 250C) |
Leakage Current |
<0.75mA / 240VAC |
|
|
OUTPUT SPECIFICATION |
Rated Current |
LRS-60-12: 5.0A |
LRS-60-24: 2.5A |
Rated Power |
60Watts |
Voltage ADJ. Range |
10% (with V.ADJ) |
Voltage Tolerance |
1% |
Ripple & Noise(Max) |
LRS-60-12: 120mVp-p |
LRS-60-24: 150mVp-p |
Setup Time |
500ms / 230VAC at full load |
Rise Time |
30ms / 230VAC at full load |
Hold Time(typ.) |
30ms / 240VAC at full load |
|
|
PROTECTION |
Overload |
100% to 110% rated load current |
Protection Type: Hiccup mode, Recovers Automatically after fault condition is removed |
Overvoltage |
Protection Type: Shutdown output voltage, re-power on to recover |
|
|
ENVIRONMENT |
Working Temperature |
-300C to 700C (derating is required according to temperature) |
Working Humidity |
20% to 90% RH |
Storage Temperature |
-400C to 850C (with no icing or condensation) |
Storage Humidity |
10% ~ 95% RH |
Vibration Resistance |
10 to 500Hz, 10min/1cycle (2G) for 60 minutes each in X,Y,Z directions |
|
|
SECURITY |
Isolation Resistance |
I/P and O/P ; I/P and FG ; O/P and FG :100MΩ at 500VDC, 250C, 70% RH |
Dielectric Strength |
Between I/P and O/P : 1.5kVAC for 1 min |
Between I/P and F.G : 1.5kVAC for 1 min |
Between O/P and F.G : 0.5kVAC for 1 min |
|
|
STANDARDS |
Safety Standards |
Accord with UL1012 |
EMC Standards |
Meet the EN55022 CLASS A Equipment |
EMS Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61000-6-2, Heavy Industry Level |